Hi! How can we help you?
Please sign in
for a more personalized experience.

Search

How to connect your HD DVR to your home Wi-Fi network with the Wireless DIRECTV CINEMA™ Connection Kit if you're NOT "SWiM Connected" or if your Network status is "Not Connected."

Print
Proceed with the steps below or watch this video demo.

Step 1

Plug one end of the power adapter into the Cinema Connection Kit (Wireless) device and the other into a surge protector (recommended) or an electrical outlet.

Step 2

Connect one end of the included Ethernet cable to the Ethernet port of the Cinema Connection Kit (Wireless) device and the other end into the Ethernet port on the back your HD DVR. (If your receiver has two Ethernet ports, use the upper port, labeled ETHERNET 1.)

Step 3

The POWER and Activity LEDs on the Cinema Connection Kit (Wireless)device light up. Wait for the Power LED to stop flashing.
You're now ready to make a wireless connection to your Wi-Fi router. Please click here to proceed.

If you are familiar with Wi-Fi Protected Setup (WPS) and know that your wirelsess router is WPS-enabled, you can go here for steps to making a quick WPS connection to your wireless router.

Was This Helpful?

 
We're sorry to hear that. Please contact us.
We appreciate you taking the time to help us improve our support site. Please take a minute to tell us how we can improve this answer to better serve you. Important: Comments are collected and periodically reviewed to help us improve answers in our knowledgebase. Due to the volume of feedback we receive, we are not able to respond to comments submitted here. If you require a response, please refer to our Contact Us page for ways you can contact DirecTV or click "email us" after you close this screen.

Related Questions

Still need help? Contact us.