Establishing a wireless connection to your home Wi-Fi network with the Cinema Connection Kit (Wireless)

After you’ve connected the Cinema Connection Kit (Wireless) device to your receiver, a message will appear on your TV screen within 60 seconds indicating the connection has been detected. Follow the steps below to proceed.

STEP1

Using your remote, select Set Up Now on the on-screen display.

STEP2

You’ll see a list of names of wireless networks the Cinema Connection Kit (Wireless) device has detected. Use the arrow keys on your remote to highlight the name of your wireless network, and then press SELECT. You’ll then see a dot next to your network. Use the arrow keys to highlight Continue and then press SELECT.

STEP3

If your network is protected, you’ll be prompted to enter the Security Key — i.e., your password — for your wireless network. When you’re done, highlight and select Continue.

STEP4

Once your Security Key has been verified, select Connect Now.

STEP5

You’ll see details of your wireless connection on the next screen. Select Continue to proceed.

STEP6

Read the information on the next screen, and then press Done.
Congratulations! Your setup is complete and you now have access to DIRECTV On Demand movies and shows, as well as all the other benefits of being connected. Please allow up to 48 hours for all the available On Demand programs to become accessible on your receiver. To find available programs, go to Channel 1000, or click here to browse online.